Instructions how to pair the Safera Sense sensor unit with Power Control unit (PCU). The Safera Sense sensor unit and PCU are paired as a factory default but in case the wireless connection is lost or if either of the units is replaced to new the sensor unit and PCU needs to be paired again.
- Make sure the sensor unit is powered on
- Press the adjustment button 2 for 5 seconds to enter the manual adjustment mode 1
- Once the sensor unit enter the manual adjustment mode 1, Sensor unit beeps and OK-button lights up lightpink
- To change the sensor unit into pairing mode, press OK Button once
- The OK button will start blinking purple-blue as an indication for searching PCU to pair with
- Switch off the power to the cooker for 10 seconds
- Return the power to the cooker
- The wireless connection is now established, which is confirmed with 3 green OK button blinks and beeps
- To ensure the connection, open Safera App and start Installation Wizard or test the manual power cut off by pressing OK button for 5 seconds or as long the power is cut off from the cooker. To restore the power to stove, press OK button once more and check that the OK button blinks green once